<p>Make: Hardinge</p>
<p>Model: TFB-H </p>
<p>Condition: Used. overall in great shape. We went through the machine and ran it. Works excellent.</p><p>Comes with some tools in the cabinet. See pictures. </p><!--StartFragment--><p>The Hardinge TFB-H Super-Precision Toolroom Lathe is designed for precision turning, facing, boring, and second-operation machining. Featuring variable spindle speeds and independent variable power feeds, this machine offers excellent control for accurate machining and fine surface finishes. Its rigid construction and precision-ground ways make it ideal for toolrooms, production shops, and general machining applications.</p><h3>Specifications</h3><p><strong>Spindle & Headstock</strong></p><ul><li>Spindle Nose: Hardinge Taper-Lock</li><li>Spindle Bore: 1-1/4"</li><li>Maximum 5C Collet Capacity: 1-1/16" Round</li><li>Hexagonal Collet Capacity: 7/8"</li><li>Square Collet Capacity: 3/4"</li><li>Standard Jaw Chuck Capacity: 5"</li><li>Spindle Speed: Infinitely Variable, 125–3,000 RPM</li></ul><p><strong>Workpiece Capacity</strong></p><ul><li>Swing Over Bed: 11"</li><li>Swing Over Carriage: 9"</li><li>Swing Over Cross Slide: 6"</li><li>Distance Between Centers: 18"</li></ul><p><strong>Feeds & Carriage</strong></p><ul><li>Independent Variable-Speed Power Feeds</li><li>Feed Rate: 1/4"–7" per minute</li><li>Compound Slide Travel: 3"</li><li>Designed for Precision Turning, Facing, and Boring</li><li>No Standard Threading Gearbox</li></ul><p><strong>Tailstock</strong></p><ul><li>Internal Taper: No. 2 Morse Taper (2MT)</li><li>Spindle Diameter: 1-3/8"</li><li>Spindle Travel: 3-3/4"</li></ul><p><strong>Electrical</strong></p><ul><li>Spindle Motor: 1.5 HP</li><li>Voltage: Commonly 220 V</li><li>Frequency: 60 Hz</li><li>Phase: 3-Phase</li><li>Control Voltage:115 V</li></ul><p><strong>Approximate Dimensions & Weight</strong></p><ul><li>Overall Dimensions: 70" L × 30" W × 63" H</li><li>Approximate Weight: 1,700–2,500 lbs</li></ul><p><em>Specifications may vary by machine configuration. Electrical requirements should be verified on the individual unit.</em></p><h3>Applications</h3><ul><li>Precision Toolroom Machining</li><li>Turning and Facing Operations</li><li>Boring and Second-Operation Work</li><li>Prototype and Small-Part Production</li><li>General Machine Shop Applications</li></ul><!--EndFragment-->
