<p></p><!--StartFragment--> <h1>1965 Hardinge HLV-H Super-Precision Toolroom Lathe</h1> <p><strong>Make:</strong> Hardinge<br><strong>Model:</strong> HLV-H<br><strong>Serial No.:</strong> HLV-H-3045<br><strong>Year New:</strong> 1965<br><strong>Condition:</strong> Used – Overall in Great Shape</p> <h3>Machine Overview</h3> <p>This 1965 Hardinge HLV-H Super-Precision Toolroom Lathe is in great overall condition. The machine has been tested and run. The entire gear train and variable-speed control system have been gone through. Everything is operating properly and quietly. The machine has been oiled and greased as needed. Threading gears and power feeds work excellent. Operating video coming soon.</p> <h3>Specifications</h3> <p><strong>Spindle & Headstock</strong></p> <ul><li>Spindle Nose: Hardinge standard 4° taper</li><li>5C Collet Capacity: 1-1/16" round</li><li>Spindle Bore: 1-1/4"</li><li>Standard Chuck Capacity: 5"</li><li>Spindle Speed: Infinitely variable, 125–3,000 RPM</li></ul> <p><strong>Workpiece Capacity</strong></p> <ul><li>Swing Over Bed: 11"</li><li>Swing Over Carriage: 9"</li><li>Swing Over Cross Slide: 6"</li><li>Distance Between Centers: 18"</li></ul> <p><strong>Threading & Feeds</strong></p> <ul><li>Quick-Change Threading Gearbox</li><li>Inch Threading Range: 11–108 TPI</li><li>27 Selectable Threading Gears</li><li>Independent DC Variable-Speed Feed Motor</li><li>Feed Rate: Infinitely variable, 5/16"–7" per minute</li></ul> <p><strong>Tailstock</strong></p> <ul><li>Morse Taper No. 2 (2MT)</li><li>Spindle Diameter: 1-3/8"</li><li>Spindle Travel: 3-3/4"</li></ul> <p><strong>Construction & Dimensions</strong></p> <ul><li>Hardened and Ground Tool Steel Dovetail Ways</li><li>Bed Width: 5"</li><li>Approximate Weight: 1,700–2,000 lbs</li><li>Approximate Dimensions: 68" L × 30" W × 58" H</li></ul> <p><strong>Electrical</strong></p> <ul><li>Motor: 1.5 HP</li><li>Voltage: 220 V</li><li>Frequency: 60 Hz</li><li>Phase: 3-Phase</li></ul> <h3>Condition</h3> <ul><li>Tested and running</li><li>Gear train and speed control inspected</li><li>Threading gears and power feeds working excellent</li><li>Properly oiled and greased</li><li>Operating video coming soon</li></ul> <!--EndFragment--><ul><li></li></ul> <!--EndFragment--> <!--EndFragment--> <!--EndFragment--> <!--EndFragment--> <!--EndFragment-->