<!--StartFragment-->
<ul><li><strong>Manufacturer:<!--TgQPHd|||[]--></strong> Schauer Mfg. Corp. (Cincinnati 42, Ohio, U.S.A.)<!--TgQPHd|||[]--><!--TgQPHd|||[]--></li><li><strong>Type / Model:<!--TgQPHd|||[]--></strong> VA2B<!--TgQPHd|||[]--><!--TgQPHd|||[]--></li><li><strong>Frame Size:<!--TgQPHd|||[]--></strong> 145T<!--TgQPHd|||[]--><!--TgQPHd|||[]--></li><li><strong>Serial Number:<!--TgQPHd|||[]--></strong> 39260M<!--TgQPHd|||[]--><!--TgQPHd|||[]--></li><li><strong>Electrical Requirements:<!--TgQPHd|||[]--></strong> <strong>220 Volts<!--TgQPHd|||[]--></strong>, <strong>3 Phase<!--TgQPHd|||[]--></strong>, <strong>60 Cycles<!--TgQPHd|||[]--></strong><!--TgQPHd|||[]--><!--TgQPHd|||[]--></li><li><strong>Two-Speed Motor Layout:<!--TgQPHd|||[]--></strong><!--TgQPHd|||[]--><ul><li><strong>Low Speed:<!--TgQPHd|||[]--></strong> 0.75 H.P. @ <strong>300 R.P.M.<!--TgQPHd|||[]--></strong> (Drawing 4.7 Amps)<!--TgQPHd|||[]--><!--TgQPHd|||[]--></li><li><strong>High Speed:<!--TgQPHd|||[]--></strong> 1.5 H.P. @ <strong>3,300 R.P.M.<!--TgQPHd|||[]--></strong> (Drawing 4.2 Amps)</li><!--TgQPHd|||[]--></ul><!--TgQPHd|||[]--></li><!--TgQPHd|||[]--></ul><p>Overall in great shape. Runs well.</p>
<!--TgQPHd|||[]-->Features & Configuration Visible on This Unit<!--TgQPHd|||[]-->
<ul><li><strong>The Chuck:<!--TgQPHd|||[]--></strong> It is currently equipped with a high-quality, adjustable <strong>Buck 3-jaw manual scroll chuck<!--TgQPHd|||[]--></strong>. the chuck body diameter is approximately <strong>6 inches<!--TgQPHd|||[]--></strong>, making it an excellent size for holding small-to-medium cylindrical parts.<!--TgQPHd|||[]--><!--TgQPHd|||[]--></li><li><strong>Debris Shield:<!--TgQPHd|||[]--></strong> It features a large, curved sheet metal wrap-around guard on the right side. This shield prevents metal chips, polishing dust, and abrasive compound from flying toward the operator or across the shop floor during high-speed spinning.<!--TgQPHd|||[]--><!--TgQPHd|||[]--></li><li><strong>Exhaust / Dust Port:<!--TgQPHd|||[]--></strong> The large metal elbow pipe coming out of the left side of the upper headstock housing is designed to connect directly to an external industrial dust collection system or vacuum line to extract internal motor heat and debris.<!--TgQPHd|||[]--><!--TgQPHd|||[]--></li><li><strong>Speed Selector:<!--TgQPHd|||[]--></strong> The mechanical lever sticking out of the lower front housing switches the internal gearing or belt setup</li></ul>
<!--EndFragment-->