<p>Make: Miyano<br/>Model: BND-51SY2<br/>Year New: 2010.07<br/>Hours: Appears to only have 2500 hours on machine- will be investigating further.<br/>LNS Bar Feeder Can be Purchased as additional $4900 -Not included in list price- See the listing here: https://globalmachinebrokers.com/equipment/8045725-lns-6-dot-52hs-5-dot-2-bar-feeds<br/>MORE PICTURES CAN BE SENT UPON REQUEST</p>
<p>Includes:<br/>-Complete Owners Manual + Extra Parts<br/>-Chip Conveyor 8"W. S.S Belt (3 Phase - 1:240 Gear Ratio<br/>-Coolant Pump (208 VAC - 5.4 KW)<br/>-DAIKIN ECO RICH #U-EHU25-M07-15-30 Hydraulic Unit<br/>-Showa 151A Oil Pump<br/>-Moxa Nport W2150A Wireless Serial Device Server Setup</p><br/><br/><ul><li>12 Position Main Turret <br></li><li>5 Live Tool Stations on machine currently <br></li><li>12 stations on backside of main turret for sub-spindle work </li><li>200-220 Volts 3 phase 40kva</li><li>Main Spindle - 11/15 kW</li><li>Sub Spindle - 3.5 / 5.5 kW</li></ul><div></div><!--StartFragment-->
<p><strong>Machining Capacity:</strong></p>
<p>
</p><p>Maximum work length: 12.6 inches</p>
<p></p><ul>
<li>Maximum bar diameter: 2.0 inches
</li>
<li>Maximum blank diameter (chucker max): 8.3 inches
</li>
</ul>
<p><strong>Spindle:</strong></p>
<p>
</p><p>Number of spindles: 2</p>
<p></p><ul>
<li>Spindle speed: 50 ～ 5,000 rpm
</li>
<li>Draw tube diameter:
<ul>
<li>SP1: 2.05 inches
</li>
<li>SP2: 1.02 inches
</li>
</ul>
</li>
<li>Power chuck type: Hydraulic
</li>
<li>Type of collet chuck:
<ul>
<li>SP1: H-S22 Pads
</li>
<li>SP2: H-S16, S22 pads
</li>
</ul>
</li>
<li>Power chuck size and type:
<ul>
<li>SP1: 6 inches Through hole type
</li>
<li>SP2: 5 inches Through hole type
</li>
</ul>
</li>
</ul>
<p><strong>Turret:</strong></p>
<p>
</p><p>Number of turrets: 1</p>
<p></p><ul>
<li>Turret stations: 12ST
</li>
<li>Shank height of square turning tool: 0.79 inches
</li>
<li>Diameter of drill shank: 0.98 inches
</li>
<li>Turret index time: 0.25 sec./1 pos.
</li>
</ul>
<p><strong>Feed Rate:</strong></p>
<p>
</p><p>Rapid feed rate:</p>
Slide stroke:
<p></p><ul>
<li>X-axis: 6.89 inches
</li>
<li>Z-axis: 17.1 inches
</li>
<li>Y-axis: +1.57 inches ～ -1.38 inches
</li>
<li>B-axis: 20.87 inches
</li>
<li>X-axis: 708.7 ipm
</li>
<li>Z-axis: 787.4 ipm
</li>
<li>Y-axis: 472.4 ipm
</li>
<li>B-axis: 708.7 ipm
</li>
</ul>
<p><strong>Revolving Tool:</strong></p>
<p>
</p><p>Number of revolving tools: Max 12</p>Tool spindle speed range: 60 ～ 6,000 rpmCapacity:
<p></p><ul>
<li>Drill: Max 0.51 inches
</li>
<li>Tap (Steel): Max M8
</li>
<li>Tap (Al, Brass): Max M8
</li>
</ul>
<p><strong>Tank Capacity:</strong></p>
<p>
</p><p>Hydraulic oil tank capacity: 2.64 US gallons</p>
<p></p><ul>
<li>Lubricating oil tank capacity: 0.53 US gallons
</li>
<li>Coolant tank capacity: 39.6 US gallons
</li>
</ul>
<p><strong>Machine Dimensions:</strong>
</p><p>Machine height: 66.9 inches</p>
<p></p>
<ul></ul><ul>
<li>Floor space: 100.8 inches × 66.9 inches
</li>
<li>Machine weight: 9,921 lbs
</li>
</ul>
<p><strong>Motors:</strong></p>
<p>
</p><p>Spindle motor:</p>
<p></p><ul>
<li>SP1: AC 15/11 kW
</li>
<li>SP2: AC 5.5/3.7 kW
</li>
<li>Revolving tool motor: AC 2.2 kW 20 Nm
</li>
</ul>
<p><br></p>
<!--EndFragment--><!--EndFragment-->
