<p>Acer Dynamic 1740S Series Large Bore Engine Lathe D1-8 Nose 20-20k Rpm 7.5 Hp</p>
<p>Make: Acer</p>
<p>Model: 1740S </p>
<p>Swing: 17'</p>
<p>Swing Over Gap: 25.5"</p>
<p>Swing Over Cross Slide: 9.5"</p>
<p>Distance Between Centers: 40"</p>
<p>Bed Width: 11-4/5"</p>
<p>Spindle Bore: 3.1” </p>
<p>Spindle Nose: D1-8</p>
<p>Taper Of Spindle Bore: MT#7</p>
<p>10” D1-8 3-Jaw Chuck</p>
<p>Spindle Speed: 20 ~ 2,000 RPM (12 Spindle Speed)</p>
<p>7.5 HP Spindle Motor </p>
<p>Compound Rest Travel: 4-7/8"</p>
<p>Cross Slide Travel: 9-2/3"</p>
<p>Steady Rest – Bronze Tip (0.39” ~ 6.29”)</p>
<p>Tail Spindle Travel: 5-7/8"</p>
<p>Tail Spindle Diameter: 2-1/4"</p>
<p>Inch Threads Range: 4~56 Tpi</p>
<p>Metric Threads Range: P 0.5~P7</p>
<p>Long Feed Range: 0.05~0.82 MM</p>
<p>Cross Feed Range: 0.02~0.4 MM</p>
<p>Leadscrew Diameter: 35 MM</p>
<p>Leadscrew Pitch: 4 Tpi</p>
<p>Auto. Feed & Threading are interlocked to prevent simultaneous functions</p>
<p>Hardened and Ground Meehanite Casting Bedway</p>
<p>Hardened and Ground Gears and Spindle</p>
<p>Thread Chasing Dial & Automatic Longitudinal Multiple Feed Stop</p>
<p>Halogen Work Light</p>
<p>Center Sleeve</p>
<p>Dead Centers x 2pcs</p>
<p>Auto-Feed Stopper Ring (4 Position)</p>
<p>Built-In Coolant System</p>
<p>Four-Way Tool Post</p>
<p>Optional Accessories Include:</p>
<p>12” 4-Jaw Independent Chuck (D1-8): $ 900.00</p>
<p>Follow Rest (Bronze Tip): 0.59” ~ 2.76” Range: $ 450.00</p>
<p>16” Face Plate: $ 400.00</p>
<p>“ALORIS” Tool Post & 4-Holder Set (#3-BS): $ 1,250.00</p>
<p>“ALORIS” Tool Post & 6-Holder Set (#3 Set): $ 1,600.00</p>
<p>“DORIAN” Tool Post & 4-Holder Set (SD35CXA-TS): $ P.O.R.</p>
<p>Micrometer Stop: $ 275.00</p>
<p>Five Position Carriage Stop: $ 350.00</p>
<p>5C Collet Closer (Lever-Type): $ 1,600.00</p>
<p>5C Collet Set (1/16” to 1-1/16” x 16ths; 17pcs/set): $ 600.00</p>
<p>Taper Turning Attachment: $ 1,700.00</p>
<p>NEWALL DP700 2-Axis D.R.O. (10” x 40”) $ 2,300</p>
<p>MAGNASCALE 2-Axis D.R.O. (10” x 40”) $ 2,500</p>
<p>Rear Full Length Splash Guard for 40”: $ 400.00</p><br/><br/><p></p>
<h1 style="text-align: center;">Acer Dynamic 1740S Series Large Bore Engine Lathe D1-8 Nose 20-20k Rpm 7.5 Hp</h1>
<p>Make: Acer<br>
Model: 1740S <br>
Swing: 17'<br>
Swing Over Gap: 25.5"<br>
Swing Over Cross Slide: 9.5"<br>
Distance Between Centers: 40"<br>
Bed Width: 11-4/5"<br>
Spindle Bore: 3.1” <br>
Spindle Nose: D1-8<br>
Taper Of Spindle Bore: MT#7<br>
10” D1-8 3-Jaw Chuck<br>
Spindle Speed: 20 ~ 2,000 RPM (12 Spindle Speed)<br>
7.5 HP Spindle Motor <br>
Compound Rest Travel: 4-7/8"<br>
Cross Slide Travel: 9-2/3"<br>
Steady Rest – Bronze Tip (0.39” ~ 6.29”)<br>
Tail Spindle Travel: 5-7/8"<br>
Tail Spindle Diameter: 2-1/4"<br>
Inch Threads Range: 4~56 Tpi<br>
Metric Threads Range: P 0.5~P7<br>
Long Feed Range: 0.05~0.82 MM<br>
Cross Feed Range: 0.02~0.4 MM<br>
Leadscrew Diameter: 35 MM<br>
Leadscrew Pitch: 4 Tpi<br>
Auto. Feed & Threading are interlocked to prevent simultaneous functions<br>
Hardened and Ground Meehanite Casting Bedway<br>
Hardened and Ground Gears and Spindle<br>
Thread Chasing Dial & Automatic Longitudinal Multiple Feed Stop<br>
Halogen Work Light<br>
Center Sleeve<br>
Dead Centers x 2pcs<br>
Auto-Feed Stopper Ring (4 Position)<br>
Built-In Coolant System<br>
Four-Way Tool Post<br>
Optional Accessories Include:</p>
<p>12” 4-Jaw Independent Chuck (D1-8): $ 900.00<br>
Follow Rest (Bronze Tip): 0.59” ~ 2.76” Range: $ 450.00<br>
16” Face Plate: $ 400.00<br>
“ALORIS” Tool Post & 4-Holder Set (#3-BS): $ 1,250.00<br>
“ALORIS” Tool Post & 6-Holder Set (#3 Set): $ 1,600.00<br>
“DORIAN” Tool Post & 4-Holder Set (SD35CXA-TS): $ P.O.R.<br>
Micrometer Stop: $ 275.00<br>
Five Position Carriage Stop: $ 350.00<br>
5C Collet Closer (Lever-Type): $ 1,600.00<br>
5C Collet Set (1/16” to 1-1/16” x 16ths; 17pcs/set): $ 600.00<br>
Taper Turning Attachment: $ 1,700.00<br>
NEWALL DP700 2-Axis D.R.O. (10” x 40”) $ 2,300<br>
MAGNASCALE 2-Axis D.R.O. (10” x 40”) $ 2,500<br>
Rear Full Length Splash Guard for 40”: $ 400.00 </p>
