<p>Emco Turn 342 CNC Turning Center 1 5/8" Spindle 8 Tool New 1994-1996***only remaining unit is a chucker, without bar feed*** Buy today! Won't last long.Disregard any information on the other units below.<br/>* Savter Turrets<br/>*Programmable Tail Stock</p>
<p>* A5 Spindle Nose with 3J Collects<br/>*All machines new between 1994 and 1996. See Photos and call for details.<br/>* 240 Volt - Machines are Austrian and run on 400V but Transformer boosts to 400V. One for each machine</p>
<p>*Swing Over Bed: 13.4”Swing Over Cross Slide: 6.2”X Axis Travel: 11.8”Z Axis Travel: 11.8”Distance Between Centers: 12”Spindle Nose: 4-5Spindle Bore: 2.087”Spindle Speed: 6000 RPMTurret Stations: 8Spindle Motor: 12/20 HPController: GE Fanuc Series 0-TTailstockDimensions: 92” L x 76” W x 70” HApprox. Weight: 5300 LbsPhotos shown are for 4 machines. 2 have since been sold. 2 were scrapped.<br/>Hours - Not sure. Counters say 8k hours but seller said no way. Original owner on all 5 machines. </p>
<p>Make offer! Must Sell 911. Books and prints included!!</p><br/><br/><p></p>
<p>Emco Turn 342 CNC Turning Center 1 5/8" Spindle 8 Tool New 1994-1996</p>
<p>2 Identical Working Machines Available and one Spare Parts Machine</p>
<p>* Savter Turrets<br>*Programmable Tail Stock<br>*Parts Catcher on one machine<br>* A5 Spindle Nose with 3J Collects<br>*All machines new between 1994 and 1996. See Photos and call for details.<br>* 240 Volt - Machines are Austrian and run on 400V but Transformer boosts to 400V. One for each machine<br>*LNS Model 642 HS 5.2 Bar Feeders - 6 tubes. Includes 4 feed tubes. <br>*Swing Over Bed: 13.4”</p>
<p>Swing Over Cross Slide: 6.2”</p>
<p>X Axis Travel: 11.8”</p>
<p>Z Axis Travel: 11.8”</p>
<p>Distance Between Centers: 12”</p>
<p>Spindle Nose: 4-5</p>
<p>Spindle Bore: 2.087”</p>
<p>Spindle Speed: 6000 RPM</p>
<p>Turret Stations: 8</p>
<p>Spindle Motor: 12/20 HP</p>
<p>Controller: GE Fanuc Series 0-T</p>
<p>Tailstock</p>
<p>Dimensions: 92” L x 76” W x 70” H</p>
<p>Approx. Weight: 5300 Lbs</p>
<p>Photos shown are for 4 machines. 2 have since been sold. Pick anyone or all. <br>Hours - Not sure. Counters say 8k hours but seller said no way. Original owner on all 5 machines. <br><br>Lots of tool holders, Collects, 2-3 A5 Nose pieces, 35 3J collects, 2 - 2 Jaw chucks, 4 - 3 Jaw Power Hold or other brand chucks. <br><br>Make offer! Must Sell 911. </p>
<p>All 2 machines running and can be inspected or we can face time. </p>
<p>Books and prints included!!</p>
