<p>Monarch VMC-175B 84.5"X 30"Table 3-Axis CNC Vert Machining Center W/Bad Control</p>
<p>Make: Monarch</p>
<p>Model: VMC-175B</p>
<p>Serial: 97607B</p>
<p>Control: GE Fanuc Series 16-M (Not Working)</p>
<p>Table Size: 84.5" X 30"</p>
<p>Max X-Axis Travel: 76"</p>
<p>Max Y-Axis Travel: 30"</p>
<p>Max Z-Axis Travel: 44"</p>
<p>Distance From Table Top To Spindle Center: 5"-49"</p>
<p>Max Table Load: 6k</p>
<p>Spindle Taper: CAT 50</p>
<p>Spindle Speeds: 30-6000 Rpm</p>
<p>Spindle Motor: 25 Hp Cont/ 30 Hp 20 Mins</p>
<p>Rapid Traverse Rate: 600"/Min</p>
<p>All Axis Cutting Feed Rate's: 0.01-400"/Min</p>
<p>460 Volt</p>
<p>60 Hz</p>
<p>3Ph </p>
<p>Please Note Machine Has A Bad Control... Asset Being Sold For Parts Or Rebuild</p>
<p>Located In Connecticut, USA </p>
<p> </p>
<p>9/21/20:</p>
<p>Machine is still under power.</p>
<p>I believe it’s a board issue or power supply, machine won’t start.</p>
<p>Length, 18’9” with guards 11’5” w/o guards</p>
<p>Width, 23’ with guards, Approximately 6’ w/o.</p><br/><br/><p></p>
<h1 style="text-align: center;">Monarch VMC-175B 84.5"X 30"Table 3-Axis CNC Vert Machining Center W/Bad Control</h1>
<p>Make: Monarch</p>
<p>Model: VMC-175B</p>
<p>Serial: 97607B</p>
<p>Control: GE Fanuc Series 16-M (Not Working)</p>
<p>Table Size: 84.5" X 30"</p>
<p>Max X-Axis Travel: 76"</p>
<p>Max Y-Axis Travel: 30"</p>
<p>Max Z-Axis Travel: 44"</p>
<p>Distance From Table Top To Spindle Center: 5"-49"</p>
<p>Max Table Load: 6k</p>
<p>Spindle Taper: CAT 50</p>
<p>Spindle Speeds: 30-6000 Rpm</p>
<p>Spindle Motor: 25 Hp Cont/ 30 Hp 20 Mins</p>
<p>Rapid Traverse Rate: 600"/Min</p>
<p>All Axis Cutting Feed Rate's: 0.01-400"/Min</p>
<p>460 Volt</p>
<p>60 Hz</p>
<p>3Ph </p>
<p>Please Note Machine Has A Bad Control... Asset Being Sold For Parts Or Rebuild</p>
<p>Located In Connecticut, USA </p>
<p> </p>
<p>9/21/20:</p>
<p>Machine is still under power.</p>
<p>I believe it’s a board issue or power supply, machine won’t start.</p>
<p>Length, 18’9” with guards 11’5” w/o guards</p>
<p>Width, 23’ with guards, Approximately 6’ w/o.</p>
