Cincinnati 18" x 72" OD/ID Cylindrical Grinder with ID attachment

Cincinnati 18" x 72" OD/ID Cylindrical Grinder with ID attachment Make:  Cincinnati S/N 3U6F6P-5 Swing:  18" Distance between centers:  72" Wired 440V/3ph Includes ID attachment Runs good Currently under power. CATALOG SPECIFICATIONS: Swing Over Table, Maximum 16.9375" Grinding Diameter, Minimum 0" Grinding Diameter, Maximum 16" Distance Between Centers, Nominal 72" Grinding Wheel Diameter, Standard 14" Grinding Wheel Width, Standard 2" Grinding Wheel Hole Diameter 5" Table Swivel Taper Forward 3" TPF Table Swivel Taper Back 1" TPF Table Swivel Angle Forward 7-DEGREES Table Swivel Angle Back 2-DEGREES Headstock Swivel Forward 90-DEGREES Headstock Swivel Back 30-DEGREES Workhead and Tailstock Center Tapers #10 B&S Workhead Spindle Speeds, Range 25 to 225 RPM Table Longitudinal Feeds, Infinite 3 to 240 IPM Automatic In-Feed at Table Reversal .0004 to .014 IPR Grinding Wheelhead Spindle Motor 5 HP/1740 RPM Internal Grinding Attachment, HP 2 HP Hydraulic Motor, Horsepower 1.5 HP Workhead Motor, Horsepower 3/4 HP Floor Space Required, L x D 19'9" x 5'9" Weight, Approximately 12500 LBS   PRICE  -(Loaded on flatbed truck) Lavonia, GA   no leaks , ready to run , under power now , dead center on drive end and live center tailstock , auto feed yes .  Specifications read:  14” x 1.5” x 5” OR 14” x 1” x 5”  seller is  there from 7 to 11 - 12 to 4 M-F . can be tried out with some notice. Floor space 19' x 6'